Ask the Experts: 309-755-8771

 0 items - View Cart

Effective Pest Bird & Wildlife Control Solutions Proud to be Family Owned and Operated Since 1950!

Solatrim Solar Panel Protection 4 ft panel Solatrim Solar Panel Protection peel and stick 3M VHB adhesive installation Solatrim Solar Panel Corner Solatrim Solar Panel Protection installed Man Installing Solatrim Solar Panel Protection J roller used to seal the adhesive bond Solatrim Solar Panel Protection on a Barrel Tile Roof Solatrim Solar Panel Protection side view installation Photo showing SolaTrim Benefits solatrim video solatrim install video solatrim adhesive tape demo Removing solatrim panels
Click an image to see a larger picture.

SolaTrim Pest Barrier for Solar Panel Protection

SolaTrim


Protect your Solar Panels with the SolaTrimTM Pest Abatement Barrier. The SolaTrim Pest Barrier is an all-weather, long lasting Pest and Debris abatement system designed to prevent Pigeons and Rodents from nesting under or damaging residential solar system arrays. The system allows air to circulate underneath the solar panels, maintaining a protected area between the roof surface and the bottom of the solar panels.

SOLATRIM Uses 3M VHB™ adhesive tape that allows for permanent peel-and-stick bonding without the use of rivets, screws or other mechanical fasteners. SolaTrim panels use this remarkable peel-and-stick feature to make the SolaTrim Panel installation quick, easy and permanent without damaging your solar panels with mechanical fasteners. Use the J Roller for a better adhesive bond.

Available in 3 Sizes:
6.75 Inches (17.14 cm) high x 48 Inches (122 cm) long
5.50 Inches (13.97 cm) high x 48 Inches (122 cm) long
(48 Ft. 5.5" Kits have 36 inch long panels)  
4.50 Inches (11.43 cm) high x 48 Inches (122 cm) long NEW!
(Measure your solar panel height before ordering)

Made in the USAMade in the USA
Buy 100 Foot Boxes and SAVE $$$

Item # Description
SOLA 20
SOLA 100
20 Feet (5 -4 Foot Panels) 6.75" high
100 Feet (25 -4 Foot Panels) 6.75" high ST675
SOLA 5-20
SOLA 5-100
SOLA 5-48
20 Feet (5 -4 Foot Panels) 5.50" high
100 Feet (25 -4 Foot Panels) 5.50" high ST550
48 Feet (16 - 3 Foot Panels) 5.50" high
SOLA 4-20
SOLA 4-100
20 Feet (5 -4 Foot Panels) 4.50" high
100 Feet (25 -4 Foot Panels) 4.50" high ST450

SolaTrim Pest Barrier for Solar Panel Protection


Item #:
Price:
Sale Price:
ItemDescriptionPriceQty
J Roller J Roller for installing SolaTrim & Shock Tape J Roller J Roller for installing SolaTrim & Shock Tape $23.95  
CT93 Cutting Tool CT93 Cutting Tool $26.95  
SPSSCLP10 Solar Mesh Clip Stainless Steel 10 ct bag SPSSCLP10 Solar Mesh Clip Stainless Steel 10 ct bag $12.50  
SPSSCLP100 Solar Mesh Clip Stainless Steel 100 ct bag SPSSCLP100 Solar Mesh Clip Stainless Steel 100 ct bag $110.00  
SolaTrim

SolaTrim Master Format Architectural 3 part Specification (PDF)

SolaTrim Installation & Specifications (PDF)

General Specifications:
  • Rust and corrosion resistant black polyester coated panels that are made from 3003-H14 aluminum
  • Each 6-3/4" or 5-1/2" x 4' panel has 3M VHB™ peel & stick adhesive along the top edge of the panel
  • .025 Aluminum stock - strengthened by design to prevent bending or warping
  • Diamond pattern stamping to allow for air flow and temperature regulation
  • One step installation - no drilling and no screws, nails or clips
SOLATRIM Three-Part Master Format Architectural Specifications
SolaTrim Pest Abatement Barrier: Solar Panel Protection

Part 1 - General
1.1 Section Includes
Solar panel protection systems, specifically SolaTrim pest abatement barriers for photovoltaic (PV)
installations. Provides solar panel protection from birds, rodents, squirrels, and debris.
1.2
References
ASTM B209 – Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate.
3M VHB Tape Standards – Specifications for high-strength acrylic foam adhesive
tapes.
1.3
Submittals
Manufacturer's product data sheet, including material and coating specifications.
Installation instructions and technical support contacts.
Sample product upon request.
1.4
Quality Assurance
Installer Qualifications: Installers must have at least one year of experience with similar installations.
Manufacturer Support: Provide manufacturer's installation guidelines and technical assistance.
1.5
Delivery, Storage, and Handling
Deliver materials in the manufacturer’s original, unopened, undamaged packaging.
Store materials in a clean, dry location at temperatures above 50°F (10°C).
1.6
Warranty
Manufacturer’s standard limited warranty of 10 years for material defects.
Part 2 - Products
2.1 Manufacturer
SolaTrim, available through Nixalite of America Inc.
Contact Information:
Nixalite of America Inc.
1025 16th Ave, East Moline, IL 61244
Phone: 800-624-1189
Email: [email protected]
Website: https://www.nixalite.com/product/solatrim-pest-barrier
2.2
Materials
Aluminum: 3003-H14 alloy, .025-inch thick.
Coating: UV-stable black polyester outside finish for weather resistance. Grey inside color.
2.3
Adhesive
High-strength 3M VHB acrylic foam tape for peel-and-stick application.
Tape strength: Minimum tensile strength of 15 pounds per square inch.
2.4
Dimensions and Configurations
Standard Panel Heights: 6.75 inches, 5.5 inches and 4.5 inches.
Length: 48 inches per piece.
Continued:
2.5
Accessories
Acetone wipes and clean cloth for surface preparation.
J-Roller for applying the correct pressure when installing the barrier to the panel frame.
Sheet metal snips for cutting and trimming barrier panels
Part 3 - Execution
3.1 Examination
Verify that surfaces are clean, dry, and free from dust, dirt, or grease.
3.2
Preparation
Use acetone wipes to clean the solar panel frame where the barrier will adhere.
Allow surfaces to dry completely.
3.3
Installation
Dry fit the panels first. Cut barriers as needed for a proper fit around the roof line, mounting brackets and
other obstacles

Peel back the adhesive liner from the 3M VHB tape and apply the SolaTrim barrier to the solar panel
frame.

Firmly press the barrier with a J-roller to achieve a minimum of 15 PSI for optimal adhesion.
3.4
Field Quality Control
Inspect installed barriers for gaps, lifting edges, or insufficient adhesion.
Make necessary adjustments to ensure full coverage and attachment.
3.5
Cleaning and Protection
Remove any installation debris from the work area.
Avoid contact with cleaning agents or solvents that may degrade the adhesive.

NEW: Now Available In 4.50", 5.50" & 6.75" Hights  

6.75 Inches (17 cm) high x 48 Inches (122 cm) long 
Sola Trim Design







 









5.50 Inches (14 cm) high x 48 Inches (122 cm) long (48 Ft. Kits have 5.5 X 36 inch long panels) 
size diagram




SOLATRIM CAD DETAILS
sola trim specifications
SolaTrim

SolaTrim Installaton & Specifcations (PDF)

SolaTrim Installation Instructions:

  1. Solar Module frames must be free of dust, debris or any foreign particles.  Use the acetone wipes provided to prepare the frames for the SolaTrim's peel & stick adhesive.
  2. When applying SolaTrim, start at the corners of the array and work toward the center. Wherever possible use full length sections on the corner edges of the modules.
  3. Place the SolaTrim pieces against the rooftop material and mark so the top of the SolaTrim panel will be near or flush to the top of the module frame.
  4. Cut the SolaTrim piece to fit using the CT93 shears or equivalent.
  5. Dry-fit the the piece before peeling off the adhesive to check for proper fit. (Note: SolaTrim panels do not need to make contact with the roof surface. Gaps of 1/8" to 1/4" are acceptable and still provide protection from intrusion.)
  6. After dry-fit, peel the paper off the adhesive strip and press the SolaTrim piece against the module frame.  Apply medium pressure with hands then use the J Roller to adhere the panel to the module. The J roller will ensure a secure adhesive bond. SolaTrim will stay in place immediately, will reach 80% adhesion in 20 min and 100% adhesion in 24 hours.
  7. If SolaTrim needs to be temporarily removed, simply pull a razor knife blade down the adhesive bead between the module frame and the SolaTrim panel.  Replace with a new panel.
Application Temperatures: Do NOT install when air temps exceed 105o F. (40o C.). For best results, apply between 50 - 85o F. (10 - 30o C.). Do not store below 50o F. (10o C).

About the J Roller:
The J Roller allows you to apply smooth and even pressure when installing SolaTrim thus providing maximum adhesion.  Bond strength is dependent upon the amount of adhesive-to-surface-contact developed.  Firm application pressure (min.15 lbs PSI) develops better ahesive contact and helps improve bond strength. (available as an accessory)

SolaTrim Installation Video:


SolaTrim   SolaTrim Customer Testimonials


“After doing research on different trims on the internet I happened to find SolaTrim. I bought a case and after a few hours, some Tin Snips, my 18 solar panels were completely encased to prevent pigeons from further nesting and causing a ruckus above my bedrooms. Great product, easy install, and aesthetically pleasing. Definitely recommended from a DIY house owner!”
– Kyle C. Fraser, Hesperia, CA
 
“We have been recommending and installing SolaTrim for over a year. We have found it to be the best value critter guard on the market. SolaTrim is easy to install, looks great and provides perfect protection against critters! The team at SolaTrim is awesome!”
– Nancy B., El Paso Green Energies
 
“I would definitely install SolaTrim on Clay Tile roofs, where pigeons tend to nest. In fact, I would probably install it on all my solar projects.”
– Tony Diaz, Century Roofing and Solar
 
“Controlling animals from accessing solar installations has become an increasing problem for us. We are excited by the possibility SolaTrim offers to provide a cost-effective, easily deployable and attractive options for our installer partners.”
– Greg Sellers, VP Clean Power Finance
 
“Our engineers tried unsuccessfully to develop a product that would do what SolaTrim does…they eventually gave up.”
– Dave Perez, Mainstream Energy
 
“I am happy with the ease of installation and flexibility to the roof type…neither of us realized how bad the problem was but I definitely see why our partners should have cost effective quality product like SolaTrim for every install.”
– David Inda, Owner, Principal, Indaspec Solar Services
 
“I love your product…this is going to make a lot of customers happy.”
– Chad Pricolo, Vice-President, Petersen Dean Roofing and Solar, Inc.

See what Fronius of Canada says about SolaTrim in their Rodent Protection article.
“The new rodent protection requirement is a benefit to both installers and PV system owners and should be implemented, regardless of the inverter technology used. It is up to the Canadian solar industry to educate customers on the safety and performance benefits of a quality PV system, which includes rapid shutdown, arc fault protection and protective barriers.”

“SolaTrim has several advantages over a simple wire mesh. It is a strong product made of lightweight aluminum with an aviation grade adhesive tape that seals it thoroughly to your solar panels. It is extreme temperature tested and comes with a 25-year warranty. We like that it is designed to be a permanent solution that will last the lifetime of the panels.”
- Suncatcher Solar of Canada
 
SolaTrim


Protect your Solar Panels with the SolaTrimTM Pest Abatement Barrier. The SolaTrim Pest Barrier is an all-weather, long lasting Pest and Debris abatement system designed to prevent Pigeons and Rodents from nesting under or damaging residential solar system arrays. The system allows air to circulate underneath the solar panels, maintaining a protected area between the roof surface and the bottom of the solar panels.

SOLATRIM Uses 3M VHB™ adhesive tape that allows for permanent peel-and-stick bonding without the use of rivets, screws or other mechanical fasteners. SolaTrim panels use this remarkable peel-and-stick feature to make the SolaTrim Panel installation quick, easy and permanent without damaging your solar panels with mechanical fasteners. Use the J Roller for a better adhesive bond.

Available in 3 Sizes:
6.75 Inches (17.14 cm) high x 48 Inches (122 cm) long
5.50 Inches (13.97 cm) high x 48 Inches (122 cm) long
(48 Ft. 5.5" Kits have 36 inch long panels)  
4.50 Inches (11.43 cm) high x 48 Inches (122 cm) long NEW!
(Measure your solar panel height before ordering)

Made in the USAMade in the USA
Buy 100 Foot Boxes and SAVE $$$

Item # Description
SOLA 20
SOLA 100
20 Feet (5 -4 Foot Panels) 6.75" high
100 Feet (25 -4 Foot Panels) 6.75" high ST675
SOLA 5-20
SOLA 5-100
SOLA 5-48
20 Feet (5 -4 Foot Panels) 5.50" high
100 Feet (25 -4 Foot Panels) 5.50" high ST550
48 Feet (16 - 3 Foot Panels) 5.50" high
SOLA 4-20
SOLA 4-100
20 Feet (5 -4 Foot Panels) 4.50" high
100 Feet (25 -4 Foot Panels) 4.50" high ST450

SolaTrim Pest Barrier for Solar Panel Protection
SOLA 20 $ 173.50 Out of stock
SOLA 4-20 $ 173.50 Out of stock
The SolaTrim Pest Barrier is an all-weather, long lasting pest, bird and debris abatement system designed to prevent birds, rodents, and critters from nesting under or damaging residential solar panel system arrays.
J Roller for installing SolaTrim & Shock Tape J Roller
J Roller $ 23.95 In stock
J Roller for installing SolaTrim & Shock Tape
Strip Cutting Tool CT93
CT93 $ 26.95 In stock
HD, straight cut aviation snips. Cleanly cuts the Nixalite base strip where desired.
Solar Panel SS Mesh Clip SPSSCLP10
SPSSCLP10 $ 12.50 In stock
Use the Stainless Steel Solar Panel Exclusion Clips to attach our coated wire mesh to your solar panels to keep birds and rodents from causing damage under the panels.
Solar Panel SS Mesh Clip SPSSCLP100
SPSSCLP100 $ 110.00 In stock
Use the Stainless Steel Solar Panel Exclusion Clips to attach our coated wire mesh to your solar panels to keep birds and rodents from causing damage under the panels.