Pigeon Spike Plastic Narrow

Pigeon Spike Plastic Narrow is our lowest cost plastic, full row bird control spike that deters pigeons and seagulls. This all UV stabilized, clear plastic spike can be installed quickly on all types of surfaces. The all plastic (polycarbonate resin) construction means it is non-conductive and will not interfere with electronic communications. One row of Pigeon Spike Plastic Narrow can cover up to 2" of surface.

M ounting Hardware for Pigeon Spike Plastic Narrow is not included and must be purchased separately from the accessory list below or the Mounting Hardware page.
(1 cartridge of adhesive will cover up to 20' or use 2 screws for every strip.)

Bird Spike Comparison Chart
FREE Nixalite Product Catalog

Installing Pigeon Spike Plastic Narrow

Pigeon Spike Plastic Narrow

Does NOT include mounting hardware or adhesive. Mounting hardware must be purchased separately. Kit Size:
Item #:
Price:
Sale Price:
Qty:

Accessories
Pigeon Spike Plastic Narrow Details
Basic Installation
Architectural Specs
Downloads

	Item	Description	Price	Qty
	600C	E6800 Adhesive Cartridge - No Air Delivery	$9.98
	MHS 75	75 Stainless Steel Screws	$9.00

Pigeon Spike Plastic Narrow:

100% clear, UV stabilized Durolon polycarbonate.
Each 13" long strip has 20 plastic points.
Measures 2" wide, 4-1/2" high and can cover 2" of surface.
Non-conductive plastic will not interfere with electronic signals.
Install with available mounting hardware or adhesive.
Install with M ounting Hardware or Adhesive

Applications
Use on all types of surfaces to hinder light roosting of pigeons and seagulls. For pigeons and seagulls only, not recommended for other birds or for controlling heavy infestations of any bird. To control all birds on all types of surfaces, use Nixalite's Premium Bird Barrier Strips.

Basic Installation Instructions: For detailed instructions download the Pigeon Spike Brochure.

Prepare the surface: Clean the surface thoroughly. It must be clean, dry and free of any bird waste. Repair any damage there might be to the installation surface.
Layout the spike positions: Using the Pigeon Spike Estimating and Spacing Guidelines, mark where the center of each spike row will be placed.
Fit it first, then fasten it: Make sure each piece fits the surface before installing. Find the Quick-Part seam that is just longer than the desired length. Gently bend the base up and down at the Quick-Part seam until it parts.
Overhang the first spike at least ½” at the end of a surface. Adjust length if needed to ensure this overhang.
For best results cut off the excess plastic base flush to the 1st spike overhanging the edge.
When butting the strips end-to-end, use the alignment notch at each end of the base. Do not allow gaps between strips or between a strip and object.

Fastening Pigeon Spikes
If fastening with adhesive, follow the manufacturers instructions printed on the adhesive container.
If installing with the optional Nixalite hardware (screws ordered separately), contact Nixalite with any questions.

CSI Specifications;
CSI Details for E-Spike Full Row bird spikes, mounting hardware, surface cleaning systems and installation accessories.

PDF file Word Document Text File

Installation and Troubleshooting support:

Pigeon Spike Plastic Brochure
General Surface Cleaning Instructions
All Installation Guides