The PLOTSAVER System:
Proven repellent for deer, elk and moose
Use safely around vegetable and flower gardens
Pleasant smell - doesn't have to smell bad to work
100% organic solution - recognized by gardening associations
Concentrate is easy to use - mixes with water
One spray application can last up to 30 days
Safe for people, pets and plants
Spray with any type of pump or compression sprayer
One quart of concentrate treats up to 5,440ft of ribbon
Repellent comes in quart and gallon concentrate sizes
Using the PLOTSAVER posts and clips, install the 3/4” wide, reusable PLOTSAVER ribbon around the outside edges of gardens, yards, lots, ponds and more. To create the sensory barrier, spray the ribbon with the PLOTSAVER repellent. Use any pressurized sprayer available. Re-spray the ribbon every 3 to 4 weeks.
How Many Posts and Clips:
PLOTSAVER posts are black or white and sold in 30 count bundles. Install AT LEAST 1 post per 30 ft of perimeter.
PLOTSAVER Post Clips are black and sold in 30 count bags. Install one Clip per post.
NOTE: Color of post or ribbon does not affect results.
Measure the outside perimeter of the area you want to enclose. Use this number to find the quantity of ribbon, repellent, posts and clips needed for the enclosure.
Install a clip on each 39” long, 3/8” thick fiberglass post. Push the pointed end of each post into the ground about 6”, following the shape of the enclosure. Max post spacing is 30 ft. Some enclosures will need tighter spacing and additional posts to closely follow the outside perimeter.
At the first post of the enclosure, fasten the ribbon to the post, 30” from the ground. Install the ribbon into the clips on the remaining posts 30” from the ground. This puts the ribbon in the most effective zone for most deer.
For fawns or small deer, move the ribbon down to 24” from the ground. For moose and elk install one ribbon at 30” and another at 48”. This requires taller posts.
Do not let the ribbon sag between posts. If it sags, the system will not work effectively.
Once installed, spray the ribbon with the liquid repellent.
Re-apply the PLOTSAVER Repellent every 30 days, regardless of weather and watering including heavy rainfall. It dries clear and odor free in about 20 minutes.
Apply the repellent with any available pump or compression sprayer.
Mixing and Coverage Rates:
Available in 1 gallon and 1 quart concentrate sizes. Mix 1 part concentrate to 9 parts water.
Concentrate + Water = Solution = Coverage
1 quart + 9 quarts water = 2.5 gallons = Treats 5,440ft of ribbon for 30 days
1 gallon + 9 gallons water = 10 gallons = Treats 21,760ft of ribbon for 30 days
NOTE: Doubling the repellent size doubles the days of protection.
Create Effective and Safe Deer Barriers with a PLOTSAVER® System
The PLOTSAVER Ribbon sprayed with the PLOTSAVER Deer Repellent creates a simple but effective sensory perimeter barrier for deer, elk and moose. Use this system to protect your entire property or just select areas within it. It can protect large areas at a fraction of the cost of broadcast spraying.