Nixalite®
Standard Mounting Hardware
Nixalite offers a wide variety of stainless steel or all
weather mounting hardware to fasten the Premium Nixalite or E-Spike
bird spike
models to nearly any surface.
Order
Mounting Hardware
Here
Supplied
With Premium Nixalite Orders
Hardware
Quantities and Spacing per Strip
Match the Hardware to
the Surface
Adhesive Fastening Methods
What makes
Nixalite's Standard Mounting Hardware the best in bird control?
- Fastens the Nixalite and E-Spike to nearly any surface
shape or material.
- Nixalite's patented mounting clips allow for quick strip
removal and reinstallation.
- Spike removal and reinstall is done without damaging the
strip, hardware or
surface.
- All hardware made of stainless steel or all-weather
materials.
- Standard hardware works with Premium Nixalite and
E-Spike.
- Hardware is SUPPLIED with Premium Nixalite. It
must be PURCHASED for all other spikes.
What we supply
with Premium Nixalite orders
We supply the hardware needed to fasten the spikes to your
installation surface. If you need more hardware than what is supplied,
it must be ordered separately. Hardware for all other spike models
must be purchased separately.
Hardware
Quantities & Spacing per Spike Strip
|
Spike Strip Length |
Hardware per Strip |
Hardware
Spacing per Strip |
|
1 ft strip (30.5 cm) |
2 Hardware
Sets |
1 at each end |
|
2 ft strip (61.0 cm) |
3 Hardware
Sets |
1 at each end, 1 in the middle |
|
4 ft strip (122.0 cm) |
6 Hardware
Sets |
1 at each end, 4 spaced evenly between |
|
Never use less than 2 sets of hardware per strip,
no matter how short the strip.
Additional hardware can be purchased separately. |
Match the Hardware to
the Surface
 |
SURFACE:
Concrete, Stone (all types), Stucco, Brick, EIFS, etc.
HARDWARE:
Masonry Mounting Hardware
Mounting Clip (MHRB), Anchor (MHA), Nail (MHN)
For installation instructions, go to: Mounting Hardware Installation
|
 |
SURFACE:
Wood, Wood framing (beams, rafters, posts, etc), Trees,
Shingles, etc.
HARDWARE:
Wood Mounting Hardware
Mounting Clip (MHRB), Nail (MHN), Washer (MHW)
For installation instructions, go to: Mounting Hardware Installation
|
 |
SURFACE:
Thin Aluminum, Copper, Steel, Metal/Vinyl Siding, PVC,
Fiberglass etc.
HARDWARE:
Sheet Metal Mounting Hardware
Mounting Clip (MHRB), Screw (MHS), Washer (MHW)
For installation instructions, go to: Mounting Hardware Installation
|
 |
SURFACE: All
Structural Steel, Steel Plate, Castings, Brass, Bronze, etc.
HARDWARE: Steel
& Iron Mounting Hardware
Mounting Clip (MHRB), Drive Screw (MHD), Washer (MHW)
For installation instructions, go to: Mounting Hardware Installation
|
 |
SURFACE:
Pipes, Cables, Conduit, Poles, Square/Round Tubing,
Fence Rails, etc.
HARDWARE: Wire Ties & Adhesive Mounting Hardware
Wire Ties (MHWT 3, 7, 12 or 18). Adhesive and Wire Tying Tools are sold separately
at Nixalite Accessories.
For installation instructions, go to: Mounting Hardware Installation
|
Adhesive Installation Methods
IMPORTANT:
Nixalite highly recommends using the supplied mechanical mounting
hardware whenever and wherever possible.
If the surface conditions do not allow the use of the supplied mounting hardware, an adhesive installation can be done.
Adhesives cannot be considered long term fastening. All adhesives, for one reason or another, will eventually deteriorate and fail. Mechanical fasteners will securely hold the Nixalite strips as long as the installation surface remains in good condition. If you must use adhesive to install Nixalite, we recommend using the Glue Clips.
 |
Nixalite Glue Clips For Nixalite Premium and E-Spike
Models Only
If the standard mounting hardware cannot be used to fasten the
Nixalite strips to the installation surface, a Glue Clip and
Adhesive installation can be done. The Glue Clip is an all
stainless steel form that allows for Nixalite strip removal and
reinstallation without damaging the adhesive bond, the Nixalite
strip or the installation surface. |
Other Adhesive Methods
“Non-Removable Installation Method”.
Do not confuse this for a ‘permanent’ fastening method. ‘Non-removable’ means that after the adhesive cures, it is
unlikely that the Nixalite strips can be removed without
damaging them or the installation surface.
Order Mounting Hardware
All of Nixalite’s mounting hardware is made from stainless steel or non-corrosive materials.
Nixalite offers mounting hardware in quantities of 72
each.
Back to top |
